Table of Contents
Advertisement
Sample 3
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Group
Policy settings for each client.
Refusing Access from Unauthorized Clients
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Default
Policy settings as follows:
Option
IPsec/Access Control
Default Policy > Access Control
Administrator Client Settings
Separate settings must be created for each Group Policy in IPsec/Access Control. Group policies are
applied in order from Group Policy 1.
Option
Group Policy n (n = 1–10)
Access Control
Remote Address (Host)
* A static IP address is recommended. If DHCP or "obtain automatically" (IPv6) is selected, the connection may terminate
when the lease or address expires.
Setting
Enable
Access Refuse
Setting
Enable
Access Permission
*
Enter the administrator client IP address
Epson
Network Guide
Tips for Administrator
56
Advertisement
Table of Contents
