❏ Supports SNMP and MIB.
❏ Supports SNTP (Simple Network Time Protocol).
❏ Supports Bonjour on Mac OS X 10.4 or later.
❏ Supports Rendezvous on Mac OS X 10.3.9.
Network Interface Operation
Status Light
The indicator lights provide you with important information on the operations of the network
interface.
Status light
Green
Green
Orange
Orange
The status light on the left side indicates whether the network interface is connected to
10Base-T or 100Base-TX. The light is orange when the connection is 100Base-TX, green
when the connection is 10Base-T.
The data light on the right side flashes when the host interface receives data.
If the light on the left side is solid green and the light on the right side is off, the connection
is disconnected.
Network Connector
RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You
can use this cable for both 10Base-T and 100Base-TX.
Data light
Green
Green (Flashing)
Green
Green (Flashing)
Status light
Network Status
Ready (10 M link)
Receiving packets (10 M link)
Ready (100 M link)
Receiving packets (100 M link)
Data light
10
Introduction