Naming Inputs - Sony HT-DDW1500 Operating Instructions Manual

When you press VIDEO 1, the image
from the component connected to the
VIDEO 1 jacks will be a HDMI image.
The sound will be output from the TV
speaker. For details, see "Hooking up
components with HDMI jacks" (page 25).
The input you can reassign to varies for
each HDMI input. For details, see
"Assignable inputs for HDMI input"
below.
To return to the previous
display
Press control button B.
Assignable inputs for HDMI
input
HDMI input Assignable
inputs
DVD VIDEO 1
VIDEO 3
DVD
MD/TAPE
SA-CD/CD
VIDEO 2 VIDEO 1
VIDEO 2
VIDEO 3
MD/TAPE
SA-CD/CD
Notes
• You cannot reassign more than one HDMI input to
the same input.
• You cannot use the HDMI input as the original
input when it has been reassigned to another input.
64 GB
Display
DVD- VD1
DVD- VD3
DVD- DVD
DVD- MD
DVD- CD
VD2- VD1
VD2- VD2
VD2- VD3
VD2- MD
VD2- CD

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
"1-LEVEL" appears on the display.
3
Press control button V/v
repeatedly to select either
"5-AUDIO" or "6-VIDEO".
4
Press the control button or
control button b to enter the
menu.
5
Press control button V/v to
select "NAME IN".
6
Press the control button or
control button b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" (page 61).
To return to the previous
display
Press control button B.