5: Preparing the receiver
and the remote
Setting the voltage selector
If your receiver and sub woofer has a voltage
selector on the rear panel, check that the
voltage selector is set to the local power supply
voltage. If not, use a screwdriver to set the
selector to the correct position before
connecting the AC power cord to a wall outlet.
Receiver
VOLTAGE
SELECTOR
120V
220V
240V
Sub woofer
VOLTAGE SELECTOR
220V
120V
30
GB
240V
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
CENTER
+
–
SURROUND BACK
L
+
–
R
FRONT
S
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
To the wall outlet