3B: Connecting The Video Components - Sony HT-DDW1500 Operating Instructions Manual

3b: Connecting the video components

How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to "4: Connecting the antennas" (page
29).
Component to be connected
Component
TV monitor
DVD player/DVD recorder
Satellite tuner
With HDMI jack*
VCR
Camcorder, video game, etc.
* Except for models of area code MX, E51, AR.
Reassigning video input signals
to another input
Component video input signals and HDMI*
input signals can be reassigned to another
input (page 62, 63).
* Except for models of area code MX, E51, AR.
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
TV monitor, etc.
Page
MONITOR OUT
22
23
26
25
27
27
Receiver INPUT
Video component
* Except for models of area code MX, E51, AR.
Notes
• Connect image display components such as a TV
monitor or a projector to the MONITOR OUT jack
on the receiver.
• Turn on the receiver when the video and audio of a
playback component are being output to a TV
through the receiver. If the power supply of the
receiver is not on, neither video nor audio is
transmitted.
INPUT jack
HDMI*
Receiver
HDMI*
jack
HDMI*
jack
OUTPUT jack
HDMI*
High quality image
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
VIDEO
21
GB