4: Connecting The Antennas; 5: Preparing The Receiver And The Remote - Sony HT-SF2300 Operating Instructions Manual

4: Connecting the
antennas
5: Preparing the receiver
and the remote
Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antennas, be sure to
disconnect the AC power cord (mains lead).
FM wire antenna (supplied)
Connect the AC power cord (mains lead) to a
wall outlet.
AC power cord (mains lead)
-..:::::::==== .....
To the wall outlet
*
The shape of the connector varies depending on
the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
24
GB