5: Preparing The Receiver And The Remote - Sony HT-DDW3000 Operating Instructions Manual

5: Preparing the receiver
and the remote
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
To the wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1,2
?/1
DIMMER SLEEP 2CH
VIDEO IN/
PORTABLE AUDIO IN/
AUTO CAL MIC A.F.D. MOVIE MUSIC
PHONES
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
After "CLEARING" appears on the
display for a while, "CLEARED"
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
21 GB