3B: Connecting The Video Components - Sony HT-DDW885 Operating Instructions Manual

3b: Connecting the video components

How to connect your
components
This section describes how to connect your
video components to this receiver. Before you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to "4: Connecting the antennas" (page
26).
Component to be connected
Component
With HDMI jack
TV
DVD player/DVD recorder
Satellite tuner/Set-top box
VCR
Camcorder, video game, etc.
18
GB
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
TV, etc. INPUT
jack
Receiver HDMI
Page
OUT, MONITOR
OUT jack
19
21
?/1
AUTO CAL
AUTO CAL MIC
22
PHONES
24
25
Receiver INPUT
25
jack
Video component
OUTPUT jack
Notes
• Connect image display components such as a TV
or a projector to the HDMI OUT or MONITOR
OUT jack on the receiver.
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
HDMI
HDMI
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC
DIMMER MUTING
VIDEO 3 IN/PORTABLE AV IN
VIDEO L AUDIO R
HDMI
HDMI
COMPONENT
VIDEO VIDEO
COMPONENT
VIDEO VIDEO
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
VIDEO
High quality image