Table of Contents
Advertisement
3b: Connecting the video components
How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to "4: Connecting the antennas" (page
23).
Component to be connected
Component
TV monitor
DVD player/DVD recorder
Satellite tuner
VCR
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Receiver MONITOR
See
page 18
page 19
page 21
page 22
Video component
Notes
• Connect image display components such as a TV
monitor or a projector to the MONITOR OUT jack
on the receiver.
• Turn on the receiver when the video and audio of a
playback component are being output to a TV
through the receiver. If the power supply of the
receiver is not on, neither video nor audio is
transmitted.
TV monitor, etc.
INPUT jack
COMPONENT
VIDEO
COMPONENT
OUT jack
VIDEO
COMPONENT
VIDEO
Receiver INPUT
jack
OUTPUT jack
COMPONENT
VIDEO
High quality image
VIDEO
VIDEO
VIDEO
VIDEO
17
GB
Advertisement
Table of Contents
