IBM xSeries 445 8870 User Manual page 25

v Error LED - This amber LED goes on when a system management error has
occurred.
v ASM interconnect port - Signal cables for managing expansion module
resources are connected to this port.
v Ethernet activity LED: When the LED is green there is activity on the Ethernet
LAN.
v Ethernet link LED: When the LED is green the link is active.
v 10/100 Ethernet port - Ethernet Signal cables are connected to the Ethernet
port.
v Management port - Signal cables for modems or other serial devices are
connected to this port.
v Power LED - This green LED is lit when you plug in your server.
Gigabit Ethernet port: Gigabit Ethernet Signal cables are connected to the Gigabit
Ethernet port. This port supports 10/100/1000 speed connections.
Upper Ethernet status LED: This LED, displays the link and activity status for the
upper Gigabit Ethernet port. When the LED is green the link is active. When the
LED blinks green and amber there is activity on the Ethernet LAN.
Lower Ethernet status LED: This LED, displays the link and activity status for the
lower Gigabit Ethernet port. When the LED is green the link is active. When the
LED blinks green and amber there is activity on the Ethernet LAN.
RXE Expansion Port A: Use this port to connect the server to a remote I/O
enclosure, when only one SMP Expansion Module is installed.
Video port: The signal cable for a monitor connects to the video port.
USB 2: This is an automatically configured port that you can use to connect one or
more USB devices to the server, using Plug and Play technology.
USB 1: This is an automatically configured port that you can use to connect one or
more USB devices to the server, using Plug and Play technology.
RXE Management Port: Use this port to connect a management cable from the
server to a remote I/O enclosure.
SCSI port: This port is used to connect external SCSI devices to the server.
SMP Expansion port 3: This port is used to interconnect two SMP Expansion
Modules together in 16-way configurations.
SMP Expansion port 2: This port is used to interconnect two SMP Expansion
Modules together.
SMP Expansion port 1: This port is used to interconnect two SMP Expansion
Modules together.
Chapter 1. Introducing the IBM xSeries 445 server
13