2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
Removal steps
Hinge cover
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the power cord and ac power adapter. See "Power cord and ac power adapter" on page 49.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
3. Remove the smart cable clip. See "Smart cable clip (for selected models)" on page 49.
Removal steps
• Type 1
• Type 2 (for selected 24-inch models only)
50
neo 30a 22 Gen 3 neo 30a 24 Gen 3 neo 30a 27 Gen 3 Hardware Maintenance Manual