Lenovo ThinkCentre neo 30a 22 Gen 3 Hardware Maintenance Manual page 40

• Whether the boot drive is working
If the POST detects a problem, an error message appears on the screen. A single problem might cause
several error messages to appear. When you correct the cause of the first error message, the other error
messages probably will not appear on the screen the next time.
Error code
0135
0162
0164
1762
34
neo 30a 22 Gen 3 neo 30a 24 Gen 3 neo 30a 27 Gen 3 Hardware Maintenance Manual
POST error message
CPU fan failure
System fan failure
Power fan failure
Front fan failure
Rear fan failure
Auxiliary fan failure
ODD fan failure
Setup data integrity check failure
Memory configuration change has
occurred
Storage device configuration change
has occurred
Description/Action
This error message is displayed
when a fan fails and the system
might be overheating.
Press F10 to exit.
This error indicates the checksum
of BIOS Setup data in NVRAM is
bad.
In BIOS Setup, the "Save
Changes and Exit" operation is
needed in order to clear this error.
This error message is displayed
when the memory size is
changed.
Press F10 to exit.
This error message is displayed
when a hard disk drive change or
an optical drive change has been
made.
Press F10 to exit.