Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3OBSHR52XXXD Series Fan
CUL Model NO. : 3OBSHR52XXXD
RETAILER NAME:
RETAILER ADDRESS:
6.54 kg
14.4 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company 3OBSHR52 D Series
Summary of Contents for Monte Carlo Fan Company 3OBSHR52 D Series
- Page 1 Owner’s Guide and Installation Manual 3OBSHR52XXXD Series Fan CUL Model NO. : 3OBSHR52XXXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 6.54 kg 14.4 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70) including fire-rated construction. - Page 3 Outlet box Before you begin installing the fan, Switch Before installing this fan make sure the Use metal outlet box suitable for fan power off at Service panel and lock outlet box is properly installed to the support and use only the screws provided service disconnecting means to prevent house structure.
- Page 4 Safety cable installation Black (Live) Blue White (Neutral) Ground/Green Hook To Wall Outlet Box Ground/ Green Lag screw White Black Safety cable Blue Washer Lock washer Hang motor assembly onto the hook on For Canadian installation and for USA fan mounting plate for hands-free wiring and and light kit combinations over 35 lbs, in safety cable installation.
- Page 5 Light fixture Plate on motor Light pan Color temperature converted switch Loosen 2 and remove 1 preassembled Loosen 2 and remove 1 preassembled Connect white wire from fan to white wire from LED light fixture and then connect screw from the plate on motor. Save screw from light pan.
- Page 6 Wall Control Wiring, Installation and Operation Warning: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid electrical shock. Note: Before installing the wall transmitter, place it in OFF position. (Fig.2) Make series-wound connection for the wall controller with HOT wire from house and lead wires from fan.
-
Page 7: Troubleshooting
Troubleshooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning and lock the service panel to prevent the power from being switched back on accidentally. If the service panel cannot be locked to prevent the power from being switched on accidentally, securely fasten a warning sign to the service panel. - Page 8 Nov.2022...