Yamaha WR250F 2017 Owner's Service Manual page 72

ITEM
Starter relay and starter motor lead
bolt
Lean angle sensor bolt
Taillight assembly screw
Taillight lead clamp and rear fender
Battery bracket bolt
Frame and battery negative lead
bolt
Rear fender and relay bracket screw
Front reflector nut (For Canada)
Rear reflector nut (For Canada)
TIP
Lower ring nut
1. First, tighten the lower ring nut approximately 38 Nm (3.8 m·kgf, 27 ft·lbf) by using the steering nut
wrench, then loosen the lower ring nut one turn.
2. Retighten the lower ring nut 7 Nm (0.7 m·kgf, 5.1 ft·lbf).
Thread
Q'ty TIGHTENING TORQUES
size
M6 1 3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
M4 2 3.8 Nm (0.38 m·kgf, 2.8 ft·lbf)
— 3 1.1 Nm (0.11 m·kgf, 0.80 ft·lbf)
— 3 0.5 Nm (0.05 m·kgf, 0.36 ft·lbf)
M6 4 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
M6 1 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
— 2 1.1 Nm (0.11 m·kgf, 0.80 ft·lbf)
M6 2 3.8 Nm (0.38 m·kgf, 2.8 ft·lbf)
M5 3 1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
2-19
TIGHTENING TORQUES
Remarks
LT