3.32 CASING REMOVAL
To facilitate indoor unit maintenance the casing can be completely removed as follows:
Aesthetic profile (1) (Fig. 43).
- Remove the plastic protection caps (2) and loosen the screws (3) to remove the aesthetic profile (1).
Cover disassembly (4) (Fig. 44).
- Open the cover door (4) to make it tilt.
- Remove the rubber protection caps (5), loosen the two upper front screws and the lower screws (6) to remove the cover (4)
Disassembling the front casing (7) (Fig. 49)
- Disassemble the front casing (7) by loosening the two screws (8) and pushing it upwards in order to free it from the fixing slots and
pulling it towards you (Det. A).
8
8
A
7
49
103