To access the "Support" menu, press the "MENU" button (Fig. 28). Go to the submenu "General settings" and select "Access level".
Insert the relative access code and customise the parameters described below according to your requirements.
To save the change of the parameters described below, press the "OK" button (Fig. 28).
Exit the "Support" menu waiting 4 minutes or enter the appropriate access code for the "User" menu.
You can exit the assistance menu by entering the appropriate access code under the "Access level" item and selecting the item
Login type / User
At the end, press "OK" to confirm.
After 4 minutes without setting any changes within the "Support" menu, the system automatically returns to the "User" menu.
Menu item
Factory setting
Menu item
Definit. System
Heat pump
Integration
Drive Manual
Special parameters
86
Menu / General settings
Allows to reset all parameters with factory values.
Menu / Support
Sub-menu to define the devices connected to the system
Heat pump operating parameters sub-menu
System integration setting sub-menu
Submenu for load operation check
Parameters for various uses
Description
Description
Range
Yes/No