Condensate drainage present in the tray (Fig.26).
Under some operating conditions, condensate may form in the tray.
Make a drain hole on the ground towards the sewer system with an internal Ø of at least 22 mm and maximum Ø of 30 mm.
Connect the supplied flexible hose to the drainage elbow (1) and pull it out at the bottom of the unit as shown in figure 26 (pos. 2 or 3).
Make sure dust, debris and/or insects cannot enter this hose.
Also make sure that the liquid contained in it cannot freeze.
1.20 KITS AVAILABLE ON REQUEST
Check the complete list of kits available and which can be combined with the product, consult the Immergas website, the Im-
mergas Price List or the technical-commercial documentation (catalogues and data sheets).
30
1
3
2
26