Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Processor
To install the Pentium II processor, reverse the steps from the "Removing the
Processor" section or follow the detailed steps below.
1.
Figure 3-13. Inserting the Pentium II Processor into the processor connector
2. Pull the processor tabs outward. The tabs will click twice, indicating that
WARNING: To reduce the risk of personal injury from hot surfaces, allow
!
the internal system components to cool before touching.
Slide the processor along the rails and push it into the processor
connector.
the processor is locked to the system board.
Compaq ProSignia 200 6/233 Setup and Installation Guide
3-15
Advertisement
Table of Contents
