Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-8 Installing the Server
Removing the Front Bezel
To gain access to the hard drive and removable media you must remove the
front bezel:
1.
2.
3.
Figure 2-3. Opening the front bezel
Remove the side access panel.
Release the three snaps that hold the bezel in place; one is located at the
bottom
and two are located on the side of the bezel .
Rotate the front bezel out to about 45 degrees, then pull to remove the
bezel from the chassis .
1
2
1
2
3
Advertisement
Table of Contents
