Battery Charging - Jeep JUC AS User Manual

CAUTION
Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.
Instructions
1. Open the kickstand
2. Turn off the scooter
Model Reference picture
JUC AS
JAD AS
JAF SR
JAF AS
JXP
CAUTION
To recharge the item, use the battery charger supplied ONLY.

4. Battery charging

Instructions
- Remove the rubber cover from the charging
- Connect the battery charger to the electrical
- When the item is fully charged, the light on
- After charging, disconnect the battery
- Unplug the battery charger from the power
Do not switch the scooter on while it is
charging.
The red light on the power supply will turn
green when the charging operation will end.
13
socket.
outlet and then to the charging socket.
the charger changes from red (charging) to
green (charging complete).
charger from the vehicle and insert again
the rubber cover.
socket.
CAUTION