Inspection And Repairs; Electrical Safety; Mains Plug Replacement - Black & Decker DCM25-B1 Manual

• When not in use, the appliance should
be stored in a dry place. Children should
not have access to stored appliances.

Inspection and repairs

• Switch off the appliance before
cleaning, changing accessories or
approaching parts which move in use
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may
affect its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply
cord for signs of damage, ageing and
wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged
or defective.
• If the power supply cord or mains plug
is damaged or defective it must be
repaired by an authorised repair agent
in order to avoid a hazard. Do not cut
the power supply cord and do not
attempt to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.

Electrical safety

Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
This product must be earthed.
Always check that the mains
voltage corresponds to the
voltage on the rating plate.
• Appliance plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(Class 1) appliances. Unmodified plugs
and matching outlets will reduce the
risk of electric shock.
Extension cables & class 1
product
• A 3 core cable must be used as
your tool is earthed and of class 1
construction.
• Up to 30m (100 ft) can be used without
loss of power.
• If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised Black+Decker Service Centre
in order to avoid a hazard.

Mains plug replacement

If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live
terminal of the new plug.
• Connect the blue lead to the neutral
terminal.
• If the product is class I (earthed),
connect the green/yellow lead to
the earth terminal.
Note: If your product is class II double
insulated (only 2 wires in the cord set),
no connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with
good quality plugs.
4