About This Document; General Safety Precautions - STEINEL professional Series Manual

GB

1. About this document

– Please read carefully and keep in a
safe place.
– Under copyright.
Reproduction either in whole or in part
only with our consent.
– Subject to change in the interest of
technical progress.
Symbols
!
Hazard warning!
Reference to other information
... in the document.

2. General safety precautions

Disconnect the power supply
!
before attempting any work on
the sensor!
• During installation, the electric power
cable being connected must not be
live. Therefore, switch off the power
first and use a voltage tester to make
sure the wiring is off-circuit.
• Installing the sensor involves work
on the mains power supply. This
work must therefore be carried out
professionally in accordance with na-
tional wiring regulations and electrical
operating conditions.
• Only use genuine replacement parts
• Repairs may only be made by special-
ist workshops.
3. HF 360-2 DALI-2 IPD /
Hallway DALI-2 IPD
Proper use
– Sensor for ceiling mounting indoors.
– Connection to the DALI bus system.
The HF 360-2 DALI-2 IPD sensor also
detects movements through thin walls.
This makes it ideal for WC facilities
with toilet cubicles, changing rooms,
stairwells, multi-storey car parks and
kitchens. The reach and sensitivity of the
sensor can be set via the DALI BUS.
The Hallway DALI-2 IPD Sensor is a
highfrequency sensor with a perfect de-
tection zone for corridors. The reach and
sensitivity can be set via the DALI BUS.
UP: concealed version
AP: surface-mounted version
Package contents (Fig. 3.1, Fig. 3.4,
Fig. 3.7, Fig. 3.10)
Product dimensions (Fig. 3.2, Fig. 3.5,
Fig. 3.8, Fig. 3.11)
Product components (Fig. 3.3, Fig. 3.6,
Fig. 3.9, Fig. 3.12)
A Surface-mounting adapter
B Load module
C Connecting terminal
D Sensor module
HF 360-2 DALI-2 IPD detection zone
DALI-2 IPD (Fig. 3.13)
HF 360-2 DALI-2 IPD detection zone
DALI-2 IPD (Fig. 3.14)
- 13 -
GB