Technical Specifications; Remote Control - STEINEL professional Series Operating Instructions Manual

Technical specifications

Dimensions (H × W × D):
Mains voltage:
Settings:
Lighting channels:
light 1 – light 4:
Stay-ON time:
Light measurement:
Basic brightness:
Stay-ON time:
HVAC output:
Switch-on delay:
Stay-ON time:
Presence stay-ON time output:
Further outputs:
Detection zones:
(detec- Tangential /
tion at
2.5 m /
mounting
height
2.5 m)
Mounting height
(mounted to ceiling):
Application:
Sensor technology:
IP rating:
Temperature range:

Remote control

Using the remote control (optional),
functions can be conveniently
activated from the floor.
120 × 120 × 68 mm DualTech
120 × 120 × 73 mm Single US
120 × 120 × 68 mm US 360
120 × 120 × 73 mm Dual US
KNX bus voltage
via ETS software, remote control or bus
Switching / dimming;
switching mode, constant lighting control
IQ mode, 1 – 30 min,
depending on presence and light level
mixed light
OFF / 10 % – 50 %
Basic brightness ON duration, 1 – 30 min
depending on presence
Room surveillance, 1 – 30 min
1 – 120 min
1 – 255 s
Light level, scene control, sabotage
US 360 / DualTech
max. Ø 6 m (28 m
presence: min. Ø 2 m (3 m
Radial: Reach up to Ø 10 m
2.5 m – 3.5 m
inside buildings
DualTech
PIR (passive infrared),
single pyro sensor,
11 detection zones,
520 switching zones,
Ultrasonic 40 kHz
IP20
-25°C to +55°C
Service remote control
RC6 KNX
EAN no.: 4007841 593018
Single US / Dual US
)
2
)
2
max. 3 × 9 m / 3 × 18 m (27 / 54 m²)
min. 3 × 2.5 m / 3 × 5 m min.
(7.5 / 15 m²)
US 360 / Single US / DualTech
Ultrasonic 40 kHz
- 11 -
User remote control
RC7 KNX
EAN no.: 4007841 592912
GB