Table of Contents
Advertisement
OM-2032 / Operation and Maintenance Manual
100D20 / Generator Sets
1. Positive cable terminal
NOTE:
Do not drain the fuel system or crankcase after this run.
(3) Clean the exterior of the engine with fuel oil. Dry with clean rags and compressed air.
(4) Seal all engine openings. Use a waterproof, vaporproof material which is strong enough to
resist puncture damage from air pressures.
c. Long Time Storage (Over 30 days)
WARNING
(1) The unit may be stored for long periods with no special preparation if the engine is operated at
least once each week.
(2) If weekly operation is not possible, prepare and protect the engine in accordance with
instructions in KHD Deutz diesel operation instructions.
(3) To protect the generator and other electrical components, the complete unit should be
packaged, using moisture packaging and sealing material. Place containers of moisture
absorbing chemicals, such as silica-gel, in the unit before packaging.
3. Preparation for Shipment
During long shipments by rail (and other means) , the generator set retaining hardware may become
loosened by vibration, jolting, etc.
Chapter 1-2
Page 4
2. Negative cable terminal
28.5-V DC Output Cable Installation
Fumes and oxygen deficiency can kill! Provide adequate ventilation before
starting the engine.
3. 28-V DC ammeter shunt
Figure 3
March 31/94 Revised
Advertisement
Table of Contents
