Setting A Panorama Image; Panorama - Sony MEX-5DI Operating Instructions Manual

About the pre/user strage area capacity
The image is stored in the "Wall Paper" user
area.
Standard mode:
A
B
C
A Pre-stored spectrum analyzer
B Pre-stored wall papers
C User area of "Wall Paper"
D Pre-stored panorama images
E User area of "Panorama"
Tip
Stored images may not display in order of they were
stored.
32

Panorama/

Wall paper mode:
D
E
B
C

Setting a panorama image

— Panorama (Panorama/Wall paper mode)
Scrolls a static image in a "Memory Stick" or
displays it in tile.
The image data you set will be stored in this unit.
To display the pre-stored images in this unit, see
"Selecting the display mode and display pattern"
on page 15.
1
Insert a "Memory Stick" (page 12).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"Panorama."
Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
4
Press (ENTER).
5
Press (ENTER) again.
6
Press M or m repeatedly to select a
location or type of image that you want
to set.
Picture Select: If an image you want to set
is in the first layer of a "Memory Stick,"
select this.
Cyber-shot: If you want to set a picture
taken by an optional Sony digital still camera
Cyber-shot, select this.
(Folder name): When a folder is in a
"Memory Stick," the folder name is
displayed.
7
Press (ENTER).
Select the folder name in step 6. If there are
images in folders of a lower layer, repeat step
6 and 7 to select the folder which contains
your desired image.
An image can be set in up to the 5th layer
folder in a "Memory Stick."
8
Press < or , repeatedly to select the
image you want to set.