Setting A New Starting Point - Subaru Outback 2017 Owner's Manual

ROUTE GUIDANCE
No. Function
Select to create a new route at the position you
selected. Previous destinations and waypoints are
deleted.
Select to add the position you selected as a new
waypoint for the current route. Other destinations for
the route are already enabled. Note: Waypoints are
set so that the optimum route is maintained between
destinations. You can use the route editing function to
set the position for waypoints on the route.
destination for the current route. Other destinations for
the route are already enabled. Up to now, the position
waypoint.
234

SETTING A NEW STARTING POINT

In standard navigation, all routes are created from the
current position. You can turn off the GPS so that you
can study a route that is not currently being driven, run a
simulation, and check the time or distance for the route. This
way, you can set a start point for the route without using the
current GPS position.
1.
Display the "Change Route (Change Route)" screen.
2.
Select (Edit Route) /
Edit Route
(Create Route).
(Edit Route) is displayed only when
Edit Route
a route is set.
Create Route
displayed when a route is not set.
3.
Select , if a warning message is displayed, select
which operation to perform.
Create Route
(Create Route) is