Screen Adjustment And Setting - Subaru AUDIO VIDEO & NAVIGATION SYSTEM Owner's Manual

■
Link night view to headlights
If it is set to "Enabled" and if the Dim sub-
display is ON, the PND display switches to the
night view mode when you turn the car lights
ON.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
(3) Touch
Link night view to headlight
It turns ON and OFF each time you touch
Link night view to headlight
(Default is ON.)
Next
(4) Touch .
Done
(5) Touch .
■
Illumination
The illumination colors can be switched.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
Next
(3) Touch .
Change
(4) Touch .
The illumination is switched as follows each time
Change
you touch the
Red (Default) ↔ Blue
(5) Touch Done .
ATTENTION
The illumination brightness of the main unit
changes as the vehicle's illumination brightness
is adjusted using the vehicle's illumination
control dial.
.
■
Voice guidance
Select the Right or Left navigation voice
.
channel.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
Next
(3) Touch .
Change
(4) Touch .
The Right and Left navigation voice channels are
switched each time you touch the
(Right channel is selected by default.)
(5) Touch Done .
- 21 -
■
Camera setting
Set the camera to the AUTO or MANUAL
operation mode.
.
In the AUTO mode, camera view is displayed on
the PND when you shift the lever to reverse
position or when you long press the [SCREEN
AV/NAV] button. In the manual mode, camera
view is displayed when you long press the
[SCREEN AV/NAV] button.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
(3) Touch
(4) Touch
The AUTO and MANUAL operations are switched
each time you touch
by default.)
(5) Touch

Screen Adjustment and Setting

Change ■
Turn Display OFF
.
(1) Press and hold the [MUTE] button.
Press the [SCREEN AV/NAV] button to return to
the previous screen.
Operation
Next
.
Change
.
Change
. (AUTO is set
Done
.