Calling The Message Sender - Subaru Outback 2017 Owner's Manual

4.
Select the desired message.
5.
Select (Send).
Send
While the message is being sent, a sending message
screen is displayed.
EDITING QUICK REPLY MESSAGES
This operation cannot be performed while driving.
1.
Select (Quick Message).
Quick Message
2.
Select corresponding to the desired message to
edit.
3.
Select (OK) when editing is completed.
OK
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
NOTE
To reset the editquick reply messages, select
(Default).
"Quick Message 1" ( I'm driving right now. I will call you back later.
(I'm driving right now. I will call you back later.)*
I am driving and will arrive in approximately [ETA] minutes.
driving and will arrive in approximately [ETA] minutes.)*
cannot be edited. [ETA] will automatically be replaced with the
If there are waypoints set, [ETA] to the next waypoint will be
shown.
If there is no route currently set in the navigation system, "Quick
Message 1" cannot be selected.
* 1 : Without navigation function
* 2 : With navigation function

CALLING THE MESSAGE SENDER

Calls can be made to an e-mail/SMS/MMS message
sender's phone number.
This operation can be performed while driving.
Default
1 or
(I am
2 )
4
131