Mitsubishi Electric PU-P71VHA 2.UK Series Service Manual page 83

<Main menu list of PAR-31MAA>
Setting and d isplay items
V ane · Louver · V ent.
(Lossnay)
High power
n timer
Timer
to- timer
Weekly timer*
OU silent mode*
Restriction Temp. range
Operation
lock
Energy Auto return
saving
Schedule*
Night setback*
Filter information
Error information
Maintenance Auto descending
panel
Manual vane
angle
Initial setting Main/ Sub
Clock
Main display
Contrast
* Clock setting is req uired.
OC37 9 J
Use to set the vane angle.
elect a esire vane setting from ve i erent settings.
•
Use to turn ON / OFF the louver.
• Select a desired setting from "ON" and "OFF."
Use to set the amount of ventilation.
elect a esire setting from "
•
Use to reach the comfortable room temperature q uickly.
• Units can be operated in the High-power mode for up to 30 minutes.
se to set the o eration n
• Time can be set in 5-minute increments.
se to set the to- time.
• Time can be set to a value from 30 to 240 in 10-minute increments.
se to set the ee l o eration
• Up to eight operation patterns can be set for each day.
Not vali hen the n
Use to set the time periods in which priority is given to q uiet operation of outdoor units over
temperature control. Set the Start/ Stop times for each day of the week.
• Select the desired silent level from "Normal," "Middle," and "Q uiet."
Use to restrict the preset temperature range.
i erent tem erat re ranges can e set for i erent o eration mo es.
Use to lock selected functions.
• The locked functions cannot be operated.
Use to get the units to operate at the preset temperature after performing energy-save
o eration for a s eci e time erio .
• Time can be set to a value from 30 and 120 in 10-minute increments.
(This function will not be valid when the preset temperature ranges are restricted.)
Set the start/ stop times to operate the units in the energy-save mode for each day of the week,
and set the energy-saving rate.
• Up to four energy-save operation patterns can be set for each day.
• Time can be set in 5-minute increments.
• Energy-saving rate can be set to a value from 0% and 50 to 9 0% in 10% increments.
Use to make Night setback settings.
• Select "Y es" to enable the setting, and "No" to disable the setting. The temperature range and
the start/ stop times can be set.
se to chec the lter stat s.
The lter sign can e reset.
Use to check error information when an error occurs.
• Check code, error source, refrigerant address, unit model, manufacturing number, contact
information (dealer' s phone number) can be displayed.
(The unit model, manufacturing number, and contact information need to be registered in
advance to be displayed.)
Auto descending panel (Optional parts) Up / Down you can do.
se to set the vane angle for each vane to a
When connecting two remote controllers, one of them needs to be designated as a sub
controller.
Use to set the current time.
Use to switch between "Full" and "B asic" modes for the Main display.
• The initial setting is "Full."
Use to adjust screen contrast.
Setting d etails
" " o " an " igh."
times.
n times.
timer is ena le .
e osition.
Continue to the nex t page