Mitsubishi Electric PU-P71VHA 2.UK Series Service Manual page 71

SW2 setting
Thermo-ON time to error stop
0 to 9 9 9
O N
1 2 3 4 5 6
Indoor unit piping temperature / cond. /
Eva. (TH5) indoor 1
O N
- to
1 2 3 4 5 6
Indoor unit piping temperature / cond. /
Eva. (TH5) indoor 2
O N - to
1 2 3 4 5 6
Indoor unit piping temperature / cond. /
Eva. (TH5) indoor 3
O N
- to
1 2 3 4 5 6
Indoor unit piping temperature / cond. /
Eva. (TH5) indoor 4
O N - to
1 2 3 4 5 6
For A-control Serv ice Tool [ PAC-SK52ST ]
A-control Serv ice Tool
[ Operation for
1. B y operating the dip switch SW2 on A-control Service Tool, the digital display of light-emitting diode (LED1) indicates the
operation mode and types of inspection with a two-digit number and symbol.
2. After the inspection, A-control Service Tool shall be removed out of outdoor unit control board.
OC37 9 J
Display detail
]
7 1
Ex p lanation for display
0 to 9 9 9
(When the time is 100 or more, the hundreds
digit and tens, unit digits are displayed by turns.)
(Ex a mple) When 415 minutes
One second interval
4
- to
(When the temperature is 0°C or less, "– " and
temperature are displayed by turns.)
- to
(When the temperature is 0°C or less, "– " and
temperature are displayed by turns.)
When no indoor unit, "00" is displayed.
- to
(When the temperature is 0°C or less, "– " and
temperature are displayed by turns.)
When no indoor unit, "00" is displayed.
- to
(When the temperature is 0°C or less, "– " and
temperature are displayed by turns.)
When no indoor unit, "00" is displayed.
Unit
Minute
15
°C
°C
°C
°C