TRENDnet User's Guide
System Configuration
Device Settings
Setup your camera name and location for easy identification. This camera
name will also be recognized by other network camera software as the
name of this camera. OSD, On Screen Display, camera name is referring to
this setting as well.
© Copyright 2014 TRENDnet. All Rights Reserved.
Names
Camera Name: Name of the camera. The camera name setup
here can be discovered by other network camera
software and OSD, On Screen Display. The default
camera name is the model number: TV-IP311PI
Location: Label where you installed this camera for reference
Authentication
RTSP: TV-IP311PI's video stream can be accessed with
RTSP, Real Time Streaming Protocol. Only the
administrator and users can view this video stream
Un-checking this box will allow everyone access to this video
stream without authentication. Default: Checked.
HTTP: TV-IP311PI can be accessed via password protected web
management interface. Un-checking this box will allow
anyone to access this camera and change its settings.
Service
Enable
TV-IP311PI embedded Telnet service for multiple camera
Telnet:
control for system developer. Default: disabled.
TV-IP311PI
28