Table of Contents
Advertisement
TRENDnet User's Guide
IP Address Filter
Set up a list of clients allow only the clients on the list to access this camera
or to reject clients on the list from access this camera.
IP Address Filter
Enable IP
Check this box to enable IP address filtering service.
Address Filter:
IP Address Filter
Choose Forbidden to ban the listed IP addresses or
Type:
Allowed to allow listed host to access this camera.
Add: Click Add to add a user account
Modify: To modify an entry on the list, highlight the entry by
clicking on it. Then, click the Modify button.
Enter the IP address then click OK
Delete:
To delete an entry on the list, highlight the entry by
clicking on it. Then, click Delete
Clear:
To clear all entries, click Clear
Click Save to save the changes
© Copyright 2017 TRENDnet. All Rights Reserved.
Quality of Service (QoS)
Setup traffic prioritization tags the video packets to go through network
switches and routers with assigned priority. You can set the Differentiated
Services Code Point (DSCP) bits on outgoing data streams. The QoS capable
network device will forward different data in different priorities. The meaning
of the value is different in different DiffServ domains. Consult your network
manager for the setup details.
IP Address Filter
Video/Audio
Enter Video/Audio DSCP. Default: 0.
DSCP:
Event/Alarm
Enter Event/Alarm DSCP. Default: 0.
DSCP:
Management
Enter Management DSCP. Default: 0.
DSCP:
Click Save to save the changes
TV‐IP318PI
34
Advertisement
Table of Contents
