Epson EcoTank L6550 Series User Manual page 383

Administrator Information
Name
Scan to Email
Scan to Cloud
Related Information
"Setting a Shared Network Folder" on page 355
&
"Configuring a Mail Server" on page 351
&
Scanning From a Computer
Install the software and check that the network scan service is enabled to scan via a network from the computer.
Software to be installed
❏ Epson ScanSmart
❏ Epson Scan 2 (application required to use the scanner feature)
Confirming that Network Scan is Enabled
You can set the network scan service when you scan from a client computer over the network. The default setting is
enabled.
1. Access Web Config and select the Scan/Copy tab > Network Scan.
2. Make sure that Enable scanning of EPSON Scan is selected.
If it is selected, this task is completed. Close Web Config.
If it is cleared, select it and go to next step.
3. Click Next.
4. Click OK.
The network is re-connected, and then the settings are enabled.
Related Information
"Running Web Config on a Web Browser" on page 298
&
>
Settings to Use the Printer
Settings
Setup for email server
Printer registration to Epson
Connect
Contact registration to Epson
Connect
>
Preparing to Scan
Location
Device
Device
Epson Connect service
383
Requirement
Setup information for
email server
Internet connection
environment
User and printer
registration to Epson
Connect