Table of Contents
Advertisement
Administrator Information
"Receive Mode:" on page 309
&
"Making Settings to Receive Faxes Operating Only a Connected Phone" on page 390
&
"Basic Settings" on page 308
&
Making Settings for the Printer's Fax Features According to Use
You can configure the printer's fax features individually using the printer's control panel according to use. The
settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax
Settings menu.
Note:
❏ Using Web Config, you can configure the printer's fax features.
❏ When you use Web Config to display the Fax Settings menu, there may be slight differences in the user interface and in
location compared to the printer's control panel.
Related Information
"Fax Settings" on page 307
&
"Making Settings for a PBX Phone System" on page 389
&
"Making Settings When You Connect a Phone Device" on page 390
&
"Making Settings to Save and Forward Received Faxes" on page 391
&
"Receiving Incoming Faxes" on page 119
&
"Making Settings to Save and Forward Received Faxes with Specific Conditions" on page 394
&
"Making Settings for Blocking Junk Faxes" on page 398
&
"Making Settings to Send and Receive Faxes on a Computer" on page 398
&
Making Settings for a PBX Phone System
Make the following settings when using the printer in offices that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
4. When sending a fax to an outside fax number using # (hash) instead of the actual external access code, select
the Access Code box, and then select Use.
The # entered instead of the actual access code, is replaced with the stored access code when dialing. Using #
helps avoid connection problems when connecting to an outside line.
Note:
You cannot send faxes to recipients in Contacts in which an external access code such as 0 or 9 is set.
If you have registered recipients in Contacts using an external access code such as 0 or 9, set the Access Code to Do Not
Use. Otherwise, you must change the code to # in Contacts.
5. Tap the Access Code input box, enter the external access code used for your phone system, and then tap OK.
>
Settings to Use the Printer
389
>
Making Fax Features Available
Advertisement
Table of Contents
