Controlling Using Protocols - Epson EcoTank L6550 Series User Manual

Administrator Information

Controlling Using Protocols

You can print using a variety of pathways and protocols.
If you are using a multi-function printer, you can use network scanning and PC-FAX from an unspecified number
of network computers.
You can lower unintended security risks by restricting printing from specific pathways or by controlling the
available functions.
Controlling protocols
Configure the protocol settings.
1. Access Web Config and then select the Network Security tab > Protocol.
2. Configure each item.
3. Click Next.
4. Click OK.
The settings are applied to the printer.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 298
&
"Protocols you can Enable or Disable" on page 421
&
"Protocol Setting Items" on page 422
&
Protocols you can Enable or Disable
Protocol
Bonjour Settings
SLP Settings
WSD Settings
LLTD Settings
LLMNR Settings
LPR Settings
RAW(Port9100) Settings
>
Advanced Security Settings
Description
You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
>
Controlling Using Protocols
421