Replacing The Display; Procedure; Post-Requisites - Dell Alienware 17 R3 Service Manual

Replacing the display back-
cover
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1
Replace the AlienFX AlienHead board.
2 Replace the AlienFX Display light.
3
Adhere the display-board and camera cable to the display back-cover.
4 Route the display-board cable through the routing guides on the display
back-cover.
5 Connect the camera cable to the camera module.

Post-requisites

1
Replace the Alienware AlienHead LED
2 Replace the display-panel AlienFX
3
Replace the camera.
4 Replace the display
5
Replace the display
6 Replace the display
7
Follow the procedure from step 5 to step 11 in "Replacing the
8 Replace the wireless
9
Replace the base
Before working inside your
LEDs.
panel.
bezel.
assembly.
card.
panel.
computer. For more safety best
board.
computer.
palm rest".
135