Setting Of Dip Switches And Rsw Switches; Location Of Dip Switches And Rotary Switches; Function Of Dip Switches And Rotary Switches - Hitachi YUTAKI S Series Installation And Operation Manual

6.3

Setting of DIP switches and RSW switches

6.3.1 Location of DIP switches and rotary switches
6
6.3.1.1 Function of DIP switches and rotary switches

NOTE
• The mark "" indicates the dip switches positions.
• No mark "" indicates pin position is not affected.
• The figures show the settings before shipment or after selection.
• "Not used" means that the pin must not be changed. A malfunction might occur if changed.
!
CAUTION
Before setting dip switches, first turn the power supply OFF and then set the position of dip switches.
If the switches are set without turning the power supply OFF, the contents of the setting are invalid.
34
PMEN0643 rev.0 - 04/2023