Table of Contents
Advertisement
1
Important key information
1.1
Scope of delivery
With the purchase of the e-tron system trainer you receive
the e-tron system trainer itself,
the operating instructions for the e-tron system trainer
the power supply cable
a set of 2 ignition keys
a set of two switch keys
a tool for the service plug
1.2
Responsibilities
1.2.1
Responsibilities of the system builder
CE declaration of conformity: All directives applicable for the product are fulfilled. Within
the scope of CE certification, only the RoHS 2011/65/EU directive is relevant for the
product.
1.2.2
Responsibilities of the operator
The operating instructions of the manufacturer must be complied with. All safety
precautions must not be switched off or bypassed by the operator. The product may only
be used in its entirety, i.e. no components may be added or removed. The sale or misuse
of the components is prohibited.
1.3
Legal information
The e-tron system trainer complies with the requirements of EU Regulation 765/2008
1.4
Documentation
1.4.1
Background information on content and structure
The CE certification was carried out with the aid of certification software from WEKA.
Some of the content was used from the safety instructions of the power supply unit (see
chapter in the appendix)
1.4.2
Content and structure
The documentation is divided into:
-
Cover sheet
-
Important, fundamental information
-
Safety
-
Technical data
-
System description
-
Delivery, internal transport, unpacking
-
Storage conditions
-
Set-up conditions
-
Assembly and installation, initial commissioning
HV- Trainer
Important key information
5 of 34
Advertisement
Table of Contents
