2.3.2
Requirements for the personnel
Authorised
The following persons are authorised to handle the product:
Transporter (activity, required qualification): Transport of the packed e-tron system trainer,
none
Operator (activity, required qualification): Measurements on the e-tron system trainer,
sensitised for activities in the high-voltage range
Trainees/interns/pupils/students (activity, required qualification): Measurements on the e-tron
system trainer, sensitised for activities in the high-voltage range.
General public, e.g., visitors, children, pedestrians, etc., (activity, required qualification): no
authority
Especially vulnerable persons, e.g., pregnant women or people with reduced performance
(activity, required qualification: no authorisation)
2.3.3
Safety-relevant environmental conditions
Type of usage
The product is intended for use:
outdoors (without protection from the weather): no
on roofed surfaces (without walls): no
in roofed and closed rooms: yes
underground: no
on/under/in water: no
in potentially explosive atmospheres: no
2.3.4
Safety instructions for certain phases of life
Set-up conditions: level, firm, horizontal surface; the e-tron system trainer must be
secured against rolling away; maintain the working space around the system trainer; to
avoid scratches or pressure marks on the floor, protect it with a suitable underlay
Connection conditions: A standard household socket with 115/230 VAC and 50/60 Hz is
required.
Only use the connection cable that was supplied with the device
Operation: Operation by authorised personnel only; the operating instructions must be
complied with
Dismantling: The e-tron system trainer may not be dismantled, no components may be
opened or exchanged; the fuse may be changed by a qualified technician if necessary; do
not carry out your own repairs on the e-tron system trainer; in case of infringement, the
warranty expires
Disposal: The e-tron system trainer must be returned to the manufacturer and must not be
disposed of improperly.
2.4
Possible misuse
The following actions must be refrained from:
Performing an amperage measurement on the e-tron system trainer
Connecting a charger to the charging socket: System is Inactive !
Use of the e-tron system trainer as a storage area
HV- Trainer
persons
Safety
10 of 34