Table of Contents
Advertisement
2.9
Flight mode
In certain areas, radio transmission is not allowed and the wheelchair must be
set to flight mode.
IMPORTANT! Systems data can be transmitted
WARNING! Activate flight mode where radio
transmission is not allowed
2.9.1
Activating flight mode
1.
Turn on the power wheelchair.
2. Go into seat mode by using the mode button on the joystick or Omni
display. If the control panel does not have a mode button, use the left
paddle switch for mode selection. A switch plugged into the 1/8"
monojack port of the joystick or Omni display can also be used for mode
selection.
3. If the control panel is an Omni programmed for switched driver controls,
continue from step 6.
58 - Power Platform R-net LCD control panel
Advertisement
Table of Contents
