Permobil CJSM2 User Manual page 37

Power platform r-net lcd

Hide thumbs Also See for CJSM2:

Table of Contents

2.7.2.2 Pairing setup

The control panel Bluetooth must then be put into discovery mode by

following this sequence description:

• Deflect the joystick forwards and hold until there is a beep.

This takes approximately 10 seconds; then release.

• Deflect the joystick in the reverse direction and hold until there is a beep.

This takes approximately 10 seconds; then release.

The screen will display a flashing Bluetooth icon above the computer image.

This confirms that the control panel Bluetooth is set in discovery mode. It is

now discoverable for other Bluetooth devices.

2.7.2.3 Pairing with different devices

Depending on the type of device you are pairing with, a PC, an Android device

or an iDevice, you will need to follow a specific procedure.

Some procedures are described below.

12:00

Outdoor

Power Platform R-net LCD control panel - 37

45%

Table of Contents