Installing The Memory Module; Removing The Heat Sink; Installing The Heat Sink - Dell OptiPlex 7040M Owner's Manual

Installing the memory module

1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module socket and press it until it clicks into place.
3. Install the:
a. system fan
b. cover
4. Follow the procedure in

Removing the heat sink

1. Follow the procedure in
2. Remove the:
a. cover
b. hard drive assembly
c. system fan
3. To remove the heat sink:
a. Loosen the captive screws that secure the heat sink to the computer [1].
b. Lift the heat sink away from the computer [2].

Installing the heat sink

1. Place the heat sink on the processor.
2. Tighten the captive screws to secure the heat sink to the system board.
3. Install the:
a. system fan
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Extracción e instalación de componentes 11