Monitoring Incoming Calls - Panasonic KX-TG2357C Operating Instructions Manual

PQQX14031ZA.book 63 ページ ２００４年６月２１日 月曜日 午後３時４４分

Monitoring Incoming Calls

While a caller is leaving a message, you can monitor the call through the base unit
speaker.
• To increase the speaker volume while monitoring, press VOLUME
decrease the volume, press VOLUME
To answer a call while monitoring, press [SP-PHONE] on the base unit or press
[C] or [s] on the handset.
To turn the incoming call monitoring feature off
When the base unit is not in use, press [GREETING CHECK], then press
VOLUME [<] repeatedly until "0" is displayed. (Make sure the Answering
System is turned on.)
OR
While monitoring, press VOLUME [<] repeatedly until "0" is displayed.
• If the incoming call monitoring feature is turned off, it will remain off when the next
call is monitored.
• If you adjust the speaker volume while playing back messages or using the
speakerphone, the speaker volume for monitoring will be turned on again. To turn
the speaker volume off, see "To turn the incoming call monitoring feature off" in the
step above.
Automatic Answering Operation
Base Unit
[ ]
.
<
[ ]
. To
>
63