Erasing The Recorded Messages; Monitoring The Incoming Calls - Panasonic EASA-PHONE KX-T1450 Operating Instructions Manual

ERASING THE RECORDED MESSAGES
After you have played back the recorded messages, you can erase them by simply
pushing the KM ERASE button.
1 Push ICM ERASE until a beep is heard.
l
The unit will erase the recorded
messages while the tape is rewinding.
NOTE:
The tape can be erased even if the
record-prevention (knock-out) tabs have been
removed.
tab
MONITORING THE INCOMING CALLS
While an Incoming Message is being recorded, you can hear it, then you may
choose to pick up the telephone handset and speak to the caller before your caller
finishes leaving a message.
1 Adjust the volume control.
If you want to talk to the caller during
recording of the ICM, lift the telephone
handset and talk.
The unit will automatically stop recording and
be ready to answer the next phone call.
- 13-