Table of Contents
Advertisement
en Basic settings
16 Basic settings
You can configure the appliance to meet your needs.
16.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid disp.
Extra Dry
Tone volume
1
Factory setting (may vary according to model)
Setting Intensive drying
Open the appliance door.
1.
Press
.
2.
Press and hold
3.
and
flash.
Release buttons.
4.
Press
repeatedly until
5.
flash.
Press
repeatedly until the right
6.
level has been selected.
38
Selection
Scale with 4 levels
Scale with 4 levels
On
1
Off
Scale with 4 levels
and
until
and
Description
Set the water hardness.
→ "Setting water soften-
ing system", Page 28
Set the amount of rinse
aid to be dispensed or
switch off.
→ "Setting the amount of
rinse aid", Page 30
Switch ExtraDry on or off
for each operation.
For a better drying result
the temperature in the fi-
nal rinse is increased.
This may increase the
run time slightly.
Note: Please take care
with delicate tableware.
→ "Setting Intensive dry-
ing", Page 38
Adjustment of tone
volume.
→ "Setting signal
volume", Page 38
– If no LED lights up, Intensive
drying is switched off.
– If LED A → Page 17 lights up, In-
tensive drying is switched on.
Press
to save the setting.
7.
a The LEDs go out.
Close the appliance door.
8.
Setting signal volume
Open the appliance door.
1.
Press
.
2.
Advertisement
Table of Contents
