Table of Contents
Advertisement
en Troubleshooting
Fault
Tableware is not dry.
Plastic tableware is
not dry.
44
Cause and troubleshooting
No rinse aid used or dosage set too low.
Add Rinse aid → Page 30.
1.
Set the amount of rinse aid to be dispensed.
2.
→ "Setting the amount of rinse aid", Page 30
Selected programme has no drying phase
Select a programme with drying.
▶
Water collects in recesses of the tableware or cutlery.
Position tableware at an angle where possible.
▶
The combined detergent used has a poor drying per-
formance.
Use rinse aid to improve drying performance.
1.
Use a different combined detergent with a better
2.
drying performance.
Extra Dry not activated to improve drying perform-
ance.
Activate Extra Dry.
▶
Tableware removed too early or drying process not
yet ended.
Wait until the programme ends.
1.
Only remove tableware 30 minutes after the pro-
2.
gramme has ended.
Rinse aid used has a limited drying performance.
Use a name-brand rinse aid.
▶
Eco products may have limited effectiveness.
Not a fault. As plastic does not store heat so well, it
also does not dry as well.
No remedial action possible.
▶
Advertisement
Table of Contents
