First Use; Daily Use - Electrolux IK301BN User Manual

Hide thumbs Also See for IK301BN:
Table of Contents

Advertisement

Available languages

Available languages

8
www.electrolux.com
When normal conditions are restored
(door closed), the alarm will stop. The
buzzer can also be switched off by
pressing any button.
3.13 ChildLock function
Activate the ChildLock function to lock
the buttons from unintentional operation.
1. Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.
3.14 DrinksChill function
The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for a
certain period of time.
It is also useful when a reminder is
needed in order not to forget the bottles
placed in the freezer for fast cooling.
1. Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.

4. FIRST USE

4.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.

5. DAILY USE

WARNING!
Refer to Safety chapters.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an
audible alarm sounds. Press OK to
switch off the sound and terminate the
function.
To switch off the function repeat the
procedure until the DrinksChill goes off.
It is possible to change the
time at any time during the
countdown and at the end by
pressing the Temperature
colder button and the
Temperature warmer button.
3.15 FreeStore function
To switch on the function:
1. Press the Mode button until the
corresponding icon appears.
The FreeStore indicator flashes.
2. Press the OK button to confirm.
The FreeStore indicator is shown.
To switch off the function repeat the
procedure until the FreeStore indicator
icon goes off.
If the function is activated
automatically the FreeStore
indicator is not shown (refer
to "Daily use").
The activation of the
FreeStore function increase
the energy consumption.
CAUTION!
Do not use detergents or
abrasive powders, as these
will damage the finish.

Advertisement

Chapters

Table of Contents
loading

Table of Contents