Commissioning And Operation; Technical Specifications; Initial Operation (Commissioning) - NEUGART PLE Operating Manual

Economy/precision/application-specific gearboxes
Table of Contents

Advertisement

Operating Manual Gearbox

Commissioning and operation

5
Commissioning and operation
5.1

Technical specifications

Information
The geometric characteristics and performance data of the gearbox are described
in its technical specifications.
5.2

Initial operation (Commissioning)

Warning!
Gefahr
The direction of rotation of the gearbox can be the same or opposite. Failure to
note the direction of rotation may result in an unexpected starting direction of the
gearbox.
• Note the direction of rotation of the gearbox stated in its technical specifications.
Warning!
Gefahr
For the intended use, a gearbox has at least one freely accessible shaft through
which pulling is possible.
• Only operate the gearbox with appropriate technical safeguards.
• Protective devices for the application that safeguard the area around the gearbox
must not be disabled.
Warning!
Gefahr
When operating with an exposed feather key, the key can be thrown off as the result
of high centrifugal forces.
• Do not operate the gearbox with the feather key exposed.
• Secure or remove the feather key.
21

Advertisement

Table of Contents
loading

Table of Contents