Table of Contents
Advertisement
Operating Manual Gearbox
Mounting
Warning!
Gefahr
Incorrect connection or pretensioning of the drive-side connecting element can
cause breakage or slippage in the connection between the drive shaft and con-
necting element. This can result in breakage of a gear component or connecting
element, loss of position in the power train, or premature bearing failure. This can
result in uncontrolled rotation or blocking of the output shaft, among other things.
• If so indicated in the specifications, the gearbox must be connected to the appli-
cation with the flange geometry shown on the input and output sides.
• The permissible external loads listed in the technical specifications must be
observed.
• An uncontrolled introduction of external forces due to "overspecified" operating
conditions (e.g. additional application-side bearings for the drive shaft, excessive
belt tension when using a belt pulley) can lead to breakage of the drive shaft or
failure of the gearbox bearings. Suitable connecting elements must be used and
positional deviations must be avoided.
16
Advertisement
Table of Contents
