Attaching The Drive Unit To The Gearbox By Means Of The Drive Shaft (Free Drive Shaft) - NEUGART PLE Operating Manual

Operating Manual Gearbox
Mounting
4.3 Attaching the drive unit to the gearbox by means of the drive shaft
(free drive shaft)
Warning!
Gefahr
Due to its weight, faulty mounting, a technically faulty connection between the
motor shaft and drive pinion or in the event of impermissible deviation from the
radial and axial run-out tolerances, the motor can cause breakage of torque-
transmitting gearbox components or slip in the connection. This can result in un-
controlled rotation or blocking of the output shaft, among other things.
• The permissible motor weight or bending moment given in the technical specifi-
cations must be observed.
• The instructions for motor and drive pinion mounting must be followed.
• The radial and axial run-out tolerances required in the motor and drive pinion
mounting instructions must be satisfied with the drive pinion attached.
• The design of the connection between the motor shaft and the drive pinion
must ensure the performance data of the technical specifications.
Information
If the gearbox is prepared for attachment of a drive unit by means of a drive shaft
mounted on the gearbox, the same mounting specifications listed in 4.4 apply to the
application connection on the input and output sides.
15